Embedded Files
"Engineered for Heavy-Duty Sanitation: Robust, reliable, and high-capacity tippers built to handle the toughest municipal waste management challenges."
Hopper Tipper on Ace
Hopper Tipper on Ace
Technical Specifications
Container Capacity: 1.8 to 3.0 Cubic Meters (CuM) depending on the model.
Tipping Angle: 45^to 48^ (ensures complete discharge of waste).
Dumping Height: Approx. 620 mm.
Material: High-quality Mild Steel (usually 1.6mm to 3.0mm thickness.
Hydraulic System: Powered by the engine (PTO) or independent electric-hydraulic power pack.
Hopper on bolero
Hopper on bolero
Technical Specifications
Total Volume: Typically 3.0 to 4.0 Cubic Meters (combined).
Tipping Mechanism: Hydraulic cylinders powered by the engine's Power Take-Off (PTO)
Tipping Angle: 45 to 50 for high-discharge efficiency.
Material: Heavy-duty Mild Steel (MS) with anti-corrosive coating (important for waste handling).
Key Feature: Designed for "Door-to-Door" garbage collection.
TIpper on TATA 407
TIpper on TATA 407
Technical Specifications
Volumetric Capacity: 2.25 to 2.5 Cubic Meters (CuM)
Body Type: All-steel welded Box Body / U-Shape options
Floor Sheet Thickness: 5.0 mm (High Tensile Steel - ST 52)
Side & Front Panels: 3.0 mm - 4.0 mm (High Tensile Steel)
Tailgate: Automatic / Mechanical hinged with heavy-duty locking
Tipping Angle: 45° to 52° (Optimized for quick material discrg.)
Tipper on 03 wheeler
Tipper on 03 wheeler
Technical Specifications
Material: MS (Mild Steel) / Galvanized Sheet
Volumetric Capacity: 1.5 CuM to 1.8 CuM (Cubic Meters).
Body Thickness: 2.0 mm to 2.5 mm
Payload Capacity: Optimized for 500 kg – 600 kg (Depending on chassis).
Power Source: 12V DC Electro-Hydraulic Power Pack
Compartments: Dual-bin system for "Dry" and "Wet" waste segregation.
E-cart for garbage
E-cart for garbage
Technical Specifications
Material: MS (Mild Steel) / Galvanized Sheet
Volumetric Capacity: 1.5 to 2.0 Cubic Meters
Segregation: Dual-compartment Wet & Dry
Body Thickness: 1.6 mm to 2.0 mm
Roof Design: Closed Top / Sliding Lid
Tipping Mechanism: Rear-end / Side-end
Unloading Angle: 40° to 45°
tipper on tata 912
tipper on tata 912
Technical Specifications
Material: MS (Mild Steel) / Galvanized Sheet
Volumetric Capacity: 5.0 to 6.0 Cum
Floor Plate: 5 mm to 6 mm.
Tipping Type: Under-body Hydro lift
Cylinder Type: Multistage Telescopic
Working Pressure: 160 – 180 bar
Tipping Angle: 45° to 48°
Lifting Capacity: 10 – 12 Tons
Pump Flow Rate: 35 – 45 LPM
Page updated
Report abuse